Many AZ Spacecraft and Satellite Paints / Coatings have Years of Space-testing on MISSE
  Materials and Coatings
Measurement Services
Engineering Services
Spaceflight Systems
Information Technology
| Home | Products & Services | Company | News | Contact Us |

You are in Home | Materials and Coatings | Products | MLS-85-SB

MLS-85-SB Black Thermal Control Paint / Coating

A highly specialized pigment with a silicone binder, MLS-85-SB paint can be applied over complex surfaces with relative ease to form a bendable nonspecular black coating. This coating can be utilized in the Low Earth Orbit (LEO) space environment due to its resistance to the deleterious effects of the Atomic Oxygen (AO) flux found there.  MLS-85-SB has had limited AO testing, therefore the user should evaluate the performance of this coating for their particular application prior to use.  For Geosynchronous Earth Orbit (GEO) and terrestrial applications as a baffle absorptance coating, MLS-85-SB provides excellent service in optical and/or thermal applications.  MLS‑85-SB may also be applied with a brush, however, solar absorptance (α_s) and thermal emittance (ε_t) values may not fall within the ranges shown below.  This is an excellent coating for use with vacuum systems, optical instruments or internal as well as external spacecraft and satellite applications.

MLS-85-SB was flown on the Optical Properties Monitor (OPM) and returned after 9 months of exposure.

View of pre- and post-flight reflectance data (pdf 25KB).

The main advantage of MLS-85-SB relative to ML-210-IB, RM-550-IB and TMD-560-IB is that it has very low out outgassing and does not require controlled temperature and humidity when applying.

The table below lists the optical and application parameters of cured MLS-85-SB.

Nominal Surface Resistivity N/A
Thermal Emittance (ε_t) 0.91 ± 0.02
Solar Absorptance (α_s) 0.98 ± 0.01 at ≥ 1.5 mils thickness
Use Temperature Range -180 C to 600 C
Appearance/Color Nonspecular optical black
Nominal Dry Thickness 3.0+1.0, -1.5 mils (over 85% of coated area)
ASTM D3359A Adhesion Grade Not less than 3A
Full Cure 48 to 72 hours

Note: terms reflectance, emittance and absorptance and terms reflectivity, emissivity and absorptivity are often used interchangeably.


Corporate :: Products & Services :: Careers :: Contact :: Home
Materials & Coatings :: Instruments :: Measurement Services :: Engineering Ser. :: Spaceflight Syst. :: Information Technology
Copyright 2004, AZ Technology Corporation. All Rights Reserved.