Many AZ Spacecraft and Satellite Paints / Coatings have Years of Space-testing on MISSE
   
  Capabilities
  Materials and Coatings
Instruments
Measurement Services
Engineering Services
Spaceflight Systems
Information Technology
 
 

You are in Home | Materials and Coatings | Products | TMJ-850-LSY

TMJ-850-LSY Yellow Paint/Coating for Logos and Emblems on Spacecraft

TMJ-850-LSY Sample after 4 Years on MISSE

Above TMJ-850-LSY sample stayed the same color1 after 4 years of space exposure on MISSE.

TMJ-850-LSY is an organic yellow paint developed for use on spacecraft and satellite EVA handrails and Beta cloth utilized in the manufacture of MLI blankets.  If the Beta cloth is Teflon coated, the surface should be prepared with a suitable etchant prior to coating application for best results. A specialized pigment in a silicone binder, AMJ-850-LSR can be spray deposited with standard air spray painting equipment or high-volume low-pressure systems with the ease of other silicone paints to form a bendable organic red nonspecular marker coating for use on emblems, logos, signs etc. TMJ-850-LSY meets flammability and toxicity requirements of NHB 8060.1C.  TMJ-850-LSY has been tested and approved for use on Space Station hardware by NASA MSFC.  The results of these tests were as follows: Total Mass Loss (TML) of 0.05%, Collected Volatile Condensable Material (CVCM) of 0.01% and Water Vapor Recovery (WVR) of 0.01%.

TMJ-850-LSY has been thoroughly tested in space, having been flown on the Materials International Space Station Experiment (MISSE).

View pre- and post-flight data for TMJ-850-LSY on MISSE (after 4 years in space).

The table below lists the optical and application parameters of cured TMJ-850-LSY.

Nominal Surface Resistivity N/A
Thermal Emittance (ε_t) 0.86 ± 0.02
Solar Absorptance (α_s) ~0.39 at ≥ 3.0 mils thickness
Use Temperature Range -180 C to 600 C
Appearance/Color Nonspecular optical yellow
Nominal Dry Thickness 3.0 ± 1.0 mils (over 85% of coated area)
ASTM D3359A Adhesion Grade Not less than 3A
Full Cure, ambient 48 to 72 hours

1On screen color may vary.

Note: terms reflectance, emittance and absorptance and terms reflectivity, emissivity and absorptivity are often used interchangeably.

 

Corporate :: Products & Services :: Careers :: Contact :: Home
Materials & Coatings :: Instruments :: Measurement Services :: Engineering Ser. :: Spaceflight Syst. :: Information Technology
Copyright 2004, AZ Technology Corporation. All Rights Reserved.