Artist Rendition of Proposed Advanced Technology Solar Telescope
  Materials and Coatings
Measurement Services
Engineering Services
Spaceflight Systems
Information Technology

For News Archive

Independent Study Finds AZ Technology's Coating Displays Superior Thermal Control After 1 Year of Weathering at Haleakalā High Altitude Observatories Site

March 2008

The March 2008 issue of the newsletter of the Advanced Technology Solar Telescope Project, reports that,

"The properties of traditional white coatings and paints are known to degrade with time as they are exposed to the elements. The thermal coating system for the ATST is based on test results of samples weathered on the Haleakalā High Altitude Observatories site. Two coatings have been identified for ATST.... The coating system for the most critical areas is AZJ-4020 white epoxy thermal-control coating manufactured by AZ Technology. Initial test results indicate a solar reflectance of just over 86% and near-normal emittance of 97% after one year of weathering." ATST Quarterly News, Vol. 4, No. 1: March 2008. Reproduced couresy of NSO/AURA.
  Artist Rendition of Proposed Advanced Technology Solar Telescope, Courtesy of Tom Kekona, K.C. Environmental, Inc.  
  Rendering Courtesy of Tom Kekona, K.C. Environmental, Inc.  

This quote from the ATST newsletter represents a brief summary of a larger ATST study comparing the impact of 1 year of weather exposure atop Haleakalā on the island of Maui, Hawaii on solar reflectance and near-normal emittance of a number of coatings from various manufacturers. The study is described in detail in the proceedings paper of L. Phelps from the National Solar Observatory,

Phelps, L. (2008) "Evaluation of thermal control coatings exposed to ambient weather
conditions at Haleakalā High Altitude Observatory," Ground-based and Airborne Telescopes II, edited by Larry M. Stepp, Roberto Gilmozzi, Proc. of SPIE Vol. 7012, 701230, (2008)

The paper is available for a modest purchase price from SPIE.

The Advanced Technology Solar Telescope (ATST) Project is a large collaboration of segments of the solar physics community that is in the design phase to build the next-generation earth-based solar telescope. The project is well-described in the ATST informational tri-folder brochure on the ATST webpage.

AZJ-4020 represents an example of AZ Technology's ability to develop customized thermal control and conductive paints/coatings for use in terrestrial applications.


Corporate :: Products & Services :: Careers :: Contact :: Home
Materials & Coatings :: Instruments :: Measurement Services :: Engineering Ser. :: Spaceflight Syst. :: Information Technology
Copyright 2004, AZ Technology Corporation. All Rights Reserved.